Skip to Main Content
Menu
Articles

SitePro Dev Portal Use Cases

Explore the examples below to see how customers can utilize the SitePro Dev Portal.
Dev Portal
November 16, 2026

The SitePro Developer Portal gives customers, partners, and developers a centralized place to explore SitePro APIs, understand available integrations, and see how SitePro data can connect with the systems they already use. From equipment monitoring and business intelligence to maintenance workflows and custom applications, the Developer Portal provides the resources needed to start building connected solutions with SitePro.

1. Ingesting Equipment Data

The customer problem

Field equipment generates valuable operational data, but those readings often remain trapped on local devices or disconnected edge systems. Across multiple sites, this makes it difficult to monitor equipment consistently, identify problems early, or maintain a centralized operational history.

The why behind it

Simply storing equipment data is not enough. Customers still need a way to normalize it, visualize it, alarm on it, and report against it. Sending equipment data into SitePro centralizes those readings in a platform already built for operational monitoring, historical analysis, alarms, and reporting.

The SitePro data involved

SitePro provides equipment-specific ingestion endpoints for supported asset types. For example:

  • Sensor readings can be sent through POST /v1/edge/logs/sensor
  • Pump readings can be sent through POST /v1/edge/logs/pump

These records include identifiers, timestamps, raw and processed values, units, and other equipment-specific context.

The systems it connects to

Customer-owned sensors, pumps, edge devices, gateways, or other supported field equipment send operational readings into SitePro’s centralized platform.

The business outcome

Customers can bring equipment data from across their operation into one normalized system for live and historical visibility, alarms, reporting, and broader SitePro workflows, rather than maintaining separate infrastructure for each equipment source.

2. Exporting Ticket Data

The customer problem

Transaction and ticket data from loads, hauls, and transfers can be difficult to retrieve and reconcile across sites. When customers need historical activity for reporting, billing, or reconciliation, they may be forced to piece it together manually.

The why behind it

Reliable transaction records are critical for reconciliation, invoicing, compliance, and reporting. Without programmatic access to historical ticket data, these processes become slower, more manual, and more prone to missed discrepancies.

The SitePro data involved

Transaction and ticket records from POST /v1/transactions/logs/load, with change history available through /v1/transactions/change-logs. Records can include ticket IDs, manifest and truck numbers, volumes, timestamps, source and destination details, driver and company information, and supporting ticket images.

The systems it connects to

SitePro transaction data can feed reporting and BI tools, ERP or billing systems, customer or partner portals, and internal reconciliation applications.

The business outcome

Customers can retrieve historical transaction data on demand for faster reconciliation, reporting, compliance, and invoicing, without repeatedly rebuilding those workflows by hand.

3. Digital Twin Sync

The customer problem

Customers often manage equipment and maintenance in a CMMS or asset management system separate from SitePro. When SitePro configurations change, those updates may not carry over automatically, causing the two systems to drift apart.

The why behind it

Outdated equipment relationships can lead to incorrect maintenance workflows, stale asset records, and unreliable reporting. Manually keeping systems aligned becomes difficult as the number of sites and configuration changes grows.

The SitePro data involved

Site configuration data from GET /v1/config/site?siteId={siteId}, including devices, sensors, meters, pumps, tank groups, register mappings, and equipment relationships. Lighter and delta endpoints are also available for more efficient ongoing synchronization.

The systems it connects to

SitePro provides the current site and equipment configuration to external CMMS or asset management platforms, which mirror the structure and relationships defined in SitePro.

The business outcome

Customers can keep external asset systems aligned with SitePro automatically, improving maintenance accuracy, reporting consistency, and confidence that both systems reflect the same site configuration.

4. Configuration Audit

The customer problem

As organizations scale across many sites, small configuration differences can build up over time. Naming, device settings, register mappings, or equipment relationships may drift from the intended standard, and manually checking every site is not practical.

The why behind it

Configuration drift makes sites harder to troubleshoot, support, and audit consistently. Small differences can also create unexpected behavior or weaken confidence in reporting and compliance if they go unnoticed.

The SitePro data involved

Site configuration data from GET /v1/config/site?siteId={siteId}, including devices, sensors, meters, pumps, tank groups, register mappings, and equipment relationships. Lighter configuration endpoints and a configuration update endpoint are also available when full detail is not required.

The systems it connects to

SitePro provides the current site configuration to external audit or governance tools, which compare it against a master template or expected configuration and flag missing, changed, or inconsistent settings.

The business outcome

Customers can automate configuration audits across large fleets, identify drift faster, validate new deployments, support compliance efforts, and verify that sites remain aligned with defined standards.

5. Closed-Loop Remediation

The customer problem

Pump issues like abnormal pressure, current draw, frequency, or vibration can go unnoticed until they cause a failure or are found during a manual inspection. Without continuous monitoring, early warning signs are easy to miss.

The why behind it

Reactive maintenance is expensive and disruptive. Many pump failures show detectable performance changes beforehand, but only if live data is continuously monitored and analyzed.

The SitePro data involved

Live pump performance data from GET /v1/edge/live/site/pumps/{siteId}, including frequency, amps, voltage, power factor, pressure, suction pressure, vibration, and operating status.

The systems it connects to

SitePro provides live pump data to external AI, analytics, or monitoring platforms that detect abnormal behavior. Those systems can then trigger alerts, maintenance tickets, or technician dispatches. Future Remote Command capabilities can extend this into automated remediation.

The business outcome

Customers can identify pump problems earlier, reduce unplanned downtime, and automate maintenance escalation. This shifts operations from reactive maintenance toward proactive monitoring and creates a path toward future closed-loop remediation.

6. Feeding Business Intelligence Platforms (Power BI/Tableau)

The customer problem

Operational SitePro data often remains separate from the financial and ERP data used in BI platforms, forcing teams to manually export CSVs and update spreadsheets for executive reporting.

The why behind it

Manual exports create stale reports, add labor, and introduce opportunities for error. Feeding SitePro data programmatically into BI platforms keeps operational performance aligned with financial and business metrics.

The SitePro data involved

Historical telemetry, daily site totals, equipment runtime statistics, and ticket volumes from endpoints such as POST /v1/transactions/logs/load and /v1/edge/logs/[equipment]/load.

The system it connects to

Business intelligence platforms such as Power BI, Tableau, and Looker, or data warehouses such as Snowflake, Redshift, and Azure Synapse.

The business outcome

Leadership gains automated, up-to-date visibility into field and business performance while reducing manual spreadsheet work and supporting centralized executive dashboards.

7. Maintenance & CMMS Work-Order Integration

The customer problem

Maintenance teams often manage work orders separately from operational SitePro data, leaving equipment problems to be discovered through failures or scheduled inspections.

The why behind it

Condition-based maintenance uses actual equipment performance instead of relying only on fixed schedules. SitePro telemetry can identify abnormal readings or runtime thresholds that trigger maintenance workflows before a larger failure occurs.

The SitePro data involved

Live and historical equipment metrics, runtime data, status indicators, and equipment configuration from endpoints such as GET /v1/edge/live/site/pumps/{siteId} and GET /v1/config/site?siteId={siteId}.

The systems it connects to

CMMS, EAM, and field service platforms such as SAP PM, Maximo, Fiix, and MaintainX.

The business outcome

Customers can shift toward condition-based maintenance, automate work-order escalation from equipment conditions, reduce unnecessary dispatches, and address problems earlier.

8. Regulatory, Environmental & OSHA Compliance Reporting

The customer problem

Compliance reporting often requires manually gathering operational records from multiple systems, validating timestamps, and compiling spreadsheets under regulatory deadlines.

The why behind it

Manual reporting creates opportunities for missing records, transcription errors, and delayed filings. Pulling SitePro telemetry and transaction data directly into compliance workflows creates a more consistent source for reporting.

The SitePro data involved

Historical sensor readings, transfer transactions, ticket volumes, and alarm data from endpoints such as POST /v1/transactions/logs/load and POST /v1/edge/logs/[equipment]/load.

The systems it connects to

Internal compliance databases, environmental reporting platforms, and regulatory submission tools.

The business outcome

Customers can retrieve operational records on demand, reduce manual reporting work, improve reporting consistency, and better support regulatory and audit requirements.

9. Building Custom Web & Mobile Applications

The customer problem

Customers may need specialized operational workflows, customer portals, or mobile applications tailored to their technicians, drivers, or clients.

The why behind it

SitePro APIs provide the operational backend and data access developers need, allowing them to focus on building the web or mobile experience.

The SitePro data involved

Live site data, site configurations, transaction history, ticket images, and alarm information from supported SitePro APIs.

The system it connects to

Customer- or partner-developed web applications, iOS and Android apps, and custom client portals.

The business outcome

Customers can build tailored software experiences around SitePro data without having to recreate the underlying operational data infrastructure.

If you’d like to learn more about how your business can use SitePro to build powerful integrations and connected solutions, contact us today at 866-219-8900 or sales@sitepro.com.